TM 9-2320-365-20-2
2-1293
CONTINUITY TEST
(1) Set multimeter to ohms.
(2) Set M1079 heater thermostat to highest
setting (TM 9-2320-365-10).
(3) Connect positive (+) probe of multimeter to
thermostat terminal 3.
(4) Connect negative (-) probe of multimeter to
thermostat terminal 1 and note reading on
multimeter.
(5) If continuity is not present, replace M1079
heater thermostat (para 20-44).
(6) Install thermostat cover on thermostat.
(7) Tighten screw in thermostat cover.