Change 1 2-1601/(2-1602 Blank)
TM 9-2320-365-20-2
(1) Check drive shaft for excessive movement
at universal joints.
(2) If universal joint(s) shows any movement,
replace universal joint(s) (para 9-2).
(1) Perform drive shaft hinging inspection
(para 9-3).
(2) Visually inspect drive shaft for damaged
slip yoke, bent/dented tubing, or missing
balance weights.
(3) If drive shaft does not pass hinging
inspection or visual inspection, replace drive
shaft (para 9-2).
