(1) Loosen air hose 244 at load sensing valve
control port tee fitting supply port.
(2) Start engine (TM 9-2320-365-10).
(3) Apply service brakes (TM 9-2320-365-10).
(4) Check for presence of air at air hose 244.
(5) Shut down engine (TM 9-2320-365-10).
(6) If air is not present, go to step 16 of this
fault.
(7) If air is present, replace load sensing valve
control port tee fitting (para 11-10).
(8) Tighten air hose 244 at load sensing valve
control port tee fitting supply port.
Change 1 2-1742.25
TM 9-2320-365-20-2
