CAB SUPPORT TOOL - TM-9-2320-365-20-3

BRAKE PLUNGER SEAL DRIVER - TM-9-2320-365-20-3_1051

Figure E-4. Cab Support Tool Seat - TM-9-2320-365-20-3_1053

/.5tonm1078v1-5/TM-9-2320-365-20-3 M1078 Series 2-1/2 Ton 4x4 Light Medium Tactical Vehicles (LMTV) Manual
Page Navigation
1004

E-4. CAB SUPPORT TOOL Make the cab support tool from .38 inch (.96 cm) flat steel stock and angle iron stock according to the following instructions. Refer to the parts list and Figure E-3. Cab Support Tool Strut and Cab Rest for details. Item Part Number Material Description Size Qty 1 N/A Steel, Flat Bar 4.0 in. (10.2 cm) X 33.38 in. X (84.8 cm) X 0.38 in. (0.96 cm) 1 2 N/A Steel, Flat Bar 4.0 in. (10.2 cm) X 12.0 in. (30.5 cm) X 0.38 in. (0.96 cm) 1 3 N/A Angle Iron 2.0 in. (5.1 cm) X 2.0 in. (5.1 cm) X 3.5 in. (8.9 cm) 2 4 H.S.105VW-1 Insulgrip, CSA 105 C Figure E-3. Cab Support Tool Strut and Cab Rest a. All dimensions are in inches (centimeters). b. Cut cab support tool strut (1) from steel flat bar and bend to shape as shown in Figure E-3. Cab Support Tool Strut and Cab Rest. c. Cut cab support tool cab rest (2) from steel flat bar. d. De-burr and remove sharp edges. E-6 TM 9-2320-365-20-3

Privacy Statement
Press Release
Contact