TM 9-2320-365-20-3
6-4. RADIATOR FAN SHROUDS REPLACEMENT (CONT)
(11) Apply sealing compound to threads of screw (14).
(12) Install washer (15) and screw (14) on left side of top
radiator fan shroud (2).
(13) Tighten screw (14) to 84-108 lb-in. (10-12 N·m).
(14) Position six washers (11), three screws (12), and self-
locking nuts (13) on left side of top radiator fan shroud
(2).
(15) Tighten three self-locking nuts (13) to 84-108 lb-in. (10-
12 N·m).
(16) Connect fan clutch hoses (9 and 16) to 90-degree fitting
(5).
(17) Install radiator vent hose (17) on radiator (18) with hose
clamp (19).
c. Bottom Radiator Fan Shroud Removal.
(1) Position container under radiator (1).
(2) Remove radiator cap (2) from radiator overflow tank (3).
(3) Open radiator draincock (4) and drain coolant from
radiator (1).
(4) Close radiator draincock (4).
6-18
Change 1
WARNING
Adhesive sealant MIL-S-46163 can damage
your eyes. Wear safety goggles/glasses
when using; avoid contact with eyes. If
sealant contacts eyes, flush eyes with
water
and
get
immediate
medical
attention. Failure to comply may result in
injury to personnel.
