TM 9-2320-365-20-3
6-12. WATER PUMP AND FITTINGS REPLACEMENT
This task covers:
a. Water Pump Removal
b. Water Pump Installation
c. Fittings Removal
d. Fittings Installation
e. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
100 amp alternator removed, if equipped (para 7-2).
200 amp alternator removed, if equipped (para 20-56).
Alternator brackets removed (para 7-4).
Tools and Special Tools
Goggles, Industrial (Item 15, Appendix C)
Container (52 qt (50 L) capacity)
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Torque, 0-75 lb-in. (Item 86, Appendix B)
Wrench, Adjustable, Automotive (Item 51, Appendix C)
Gage, Belt Tension (Item 15, Appendix B)
Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C)
Materials/Parts
Packing, Preformed (Item 172, Appendix G)
Packing, Preformed (Item 191, Appendix G)
Packing, Preformed (3) (Item 182, Appendix
G)
Packing, Preformed (2) (Item 179, Appendix
G)
Antifreeze, Ethylene Glycol, Permanent (Item
13, Appendix D)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris.
Failure to
comply may result in injury to personnel.
a. Water Pump Removal.
(1) Position container under radiator (1).
(2) Remove radiator cap (2) from radiator overflow tank (3).
(3) Open radiator draincock (4) and drain coolant.
(4) Close radiator draincock (4).
6-63
