TM 9-2320-365-20-3
7-10. WTEC II DASHBOARD CABLE ASSEMBLY REPLACEMENT/REPAIR
This task covers:
a. Removal
b. Disassembly
c. Assembly
d. Installation
e. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Windshield wiper motor removed (para 18-4).
Personnel heater removed (para 18-9).
Instrument panel assembly removed (para 7-15).
Tools and Special Tools
Tool Kit, Auto Fuel (Item 42, Appendix C)
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C)
Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C)
Socket Set, Socket Wrench (Item 34, Appendix C)
Materials/Parts
Dispenser, Pressure Sensitive Adhesive Tape
(Item 21, Appendix D)
Ties, Cable, Plastic (Item 76, Appendix D)
Lockwasher (4) (Item 64, Appendix G)
Lockwasher (4) (Item 90, Appendix G)
Lockwasher (2) (Item 74, Appendix G)
Lockwasher (10) (Item 73, Appendix G)
Lockwasher (4) (Item 81, Appendix G)
Personnel Required
(2)
a. Removal.
NOTE
• Remove plastic cable ties as required.
• Tag wires and connection points prior to
disconnecting.
(1) Disconnect steering column switch connector J19 (1)
from connector P19 (2).
(2) Disconnect steering column switch connector P18 (3)
from connector J18 (4).
(3) Disconnect connector J118 (5) from connector P118 (6).
7-37
