TM 9-2320-365-20-3
7-12. DIMMER SWITCH REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Instrument panel assembly removed for access
(para 7-15).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
a. Removal.
(1) Disconnect connector clamp (1) from dimmer switch
connector (2).
(2) Disconnect connector PX24 (3) from dimmer switch
connector (2).
(3) Loosen screw (4) on dimmer switch knob (5).
(4) Remove dimmer switch knob (5) from dimmer switch (6).
(5) Remove nut (7), washer (8), and dimmer switch (6) from
instrument panel assembly (9).
b. Installation.
(1) Install dimmer switch (6) in instrument panel assembly
(9) with washer (8) and nut (7).
(2) Install dimmer switch knob (5) on dimmer switch (6).
(3) Tighten screw (4) on dimmer switch knob (5).
(4) Connect connector PX24 (3) to dimmer switch connector
(2).
(5) Connect connector clamp (1) on dimmer switch
connector (2).
c. Follow-On Maintenance.
(1) Install instrument panel assembly (para 7-15).
(2) Check dimmer switch operation (TM 9-2320-365-10).
End of Task.
7-83
