TM 9-2320-365-20-34-2. INTAKE AIR CLEANER FILTER ELEMENT, AIR CLEANER ASSEMBLY, ANDPARTICLE EXTRACTION TUBE REPLACEMENT (CONT)(3) Position intake air cleaner assembly (5) on mountingbrackets (4).(4) Position washer (6) and screw (7) in resilient mount (3).(5) Position three screws (8) and self-locking nuts (9) inmounting brackets (4).(6) Tighten screw (7) to 40-52 lb-ft (54-70 N·m).(7) Tighten three self-locking nuts (9) to 40-52 lb-ft (54-70N·m).(8) Position turbocharger intake hose (10) on turbochargertube (11) with clamp (12).(9) Tighten clamp (12) to 36-48 lb-in. (4-5 N·m).CAUTIONDistance between front edge of air duct andalternator fan shroud must be no less than0.5 in. (1.27 cm). Failure to comply mayresult in damage to equipment.(10) Position air duct (13) on turbocharger (14) with clamp(15).(11) Tighten clamp (15) to 21-25 lb-in. (2-3 N·m).(12) Position turbocharger tube (11) in air duct (13) withclamp (16).(13) Tighten clamp (16) to 36-48 lb-in. (4-5 N·m).4-14
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
