TM 9-2320-365-20-3
4-2. INTAKE AIR CLEANER FILTER ELEMENT, AIR CLEANER ASSEMBLY, AND
PARTICLE EXTRACTION TUBE REPLACEMENT (CONT)
(24) Connect air filter restriction gauge hose (31) to air flow
sensor (32).
(25) Install connector J106 (33) and dust cap lanyard (34) on
chemical detector mounting bracket (35) with nut (36).
(26) Install dust cap (37) on connector J106 (33).
(27) Install four washers (38) and screws (39) in chemical
detector mounting bracket (35).
i. Particle Extraction Tube Removal.
(1) Loosen clamp (1) on particle extraction hose (2).
(2) Remove particle extraction hose (2) from particle
extraction tube (3).
(3) Remove self-locking nut (4) and screw (5) from bracket
(6). Discard self-locking nut.
(4) Loosen two clamps (7) on particle extraction hose (8).
(5) Remove particle extraction hose (8) from particle
extraction tube (3) and tailpipe (9).
4-20
