TM 9-2320-365-20-3
4-5. CHARGE AIR COOLER TO AIR INLET ELBOW TUBES AND HOSES
REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Cab raised (TM 9-2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Screwdriver Attachment, Socket Wrench (Item
46, Appendix B)
Tools and Special Tools (Cont)
Socket Set, Socket Wrench (Item 35, Appendix C)
Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C)
Materials/Parts
Nut, Self-Locking (2) (Item 138, Appendix G)
a. Removal.
(1) Remove two self-locking nuts (1), screws (2), and upper
charge air tube bracket (3) from lower charge air tube
bracket (4). Discard self-locking nuts.
NOTE
Inner and outer charge air cooler to air inlet
elbow tubes are removed the same way.
Outer charge air cooler to air inlet elbow tube
shown.
(2) Loosen clamp (5) on hose (6).
(3) Disconnect hose (6) from air inlet elbow (7).
4-31
