TM 9-2320-365-20-3
8-6. WTEC II VEHICLE INTERFACE MODULE (VIM) REPLACEMENT/REPAIR
This task covers:
a. Removal
b. Disassembly
c. Assembly
d. Installation
e. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Batteries disconnected (para 7-48).
Kick panel removed (para 16-3).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Materials/Parts
Seal Ring, Metal (Item 251, Appendix G)
a. Removal.
(1) Remove two screws (1) and washers (2) from WTEC II
VIM (3).
(2) Remove screw (4), washer (5), and two washers (6) from
WTEC II VIM (3).
(3) Loosen screw (7) in connector J116 (8).
(4) Disconnect connector J116 (8) from WTEC II VIM (3).
(5) Loosen screw (9) in connector PX33 (10).
(6) Disconnect connector PX33 (10) from WTEC II VIM (3).
(7) Remove WTEC II VIM (3) from vehicle.
8-19
