TM 9-2320-365-20-3
14-5. SPARE TIRE RETAINER REPLACEMENT/REPAIR
This task covers:
a. Removal
b. Disassembly
c. Assembly
d. Installation
e. Follow-on Maintenance
INITIAL SETUP
Equipment Conditions
Spare tire removed (TM 9-2320-365-10).
Cab raised (TM 9-2320-365-10).
Hydraulic manifold removed (para 19-4).
Tool box removed (para 16-16).
Cab leveling valve removed (para 16-8).
Air/hydraulic power unit and bracket removed (para
19-3).
Ether starting aid removed (para 4-15).
Shunt removed (para 7-26).
100 amp reverse polarity relay removed, if equipped
(para 7-27).
200 amp reverse polarity relay removed, if equipped
(M1081 only) (para 20-58).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C)
Pan, Drain (Item 24, Appendix C)
Gloves, Rubber (Item 13, Appendix C)
Tools and Special Tools (Cont)
Goggles, Industrial (Item 15, Appendix C)
Socket Set, Socket Wrench (Item 35, Appendix
C)
Wrench, Torque, 0-200 lb-in. (Item 58,
Appendix C)
Materials/Parts
Cap and Plug Set (Item 15, Appendix D)
Dispenser, Pressure Sensitive Adhesive Tape
(Item 21, Appendix D)
Ties, Cable, Plastic (Item 76, Appendix D)
Nut, Self-Locking (12) (Item 140, Appendix G)
Nut, Self-Locking (Item 142, Appendix G)
Pin, Cotter (2) (Item 207, Appendix G)
Personnel Required
(3)
a. Removal.
CAUTION
Cap or plug intake air cleaner hoses to
prevent
contamination
of
turbocharger.
Failure to comply may result in damage to
turbocharger and engine.
(1) Loosen clamp (1) on intake air cleaner boot (2).
(2) Disconnect intake air cleaner boot (2) from intake air
cleaner housing (3).
(3) Loosen clamp (4) on air compressor intake hose (5).
(4) Disconnect air compressor intake hose (5) from intake
air cleaner boot (2).
14-22
