TM 9-2320-365-20-3
14-5. SPARE TIRE RETAINER REPLACEMENT/REPAIR (CONT)
(5) Remove chain (14) from ring (15).
(6) Remove ring (15), stud (16), and sleeve (17) from lift
arm assembly (4).
NOTE
Perform steps (7) through (9) on M1081.
(7) Remove four retaining clips (18) and two grooved pins
(19) from front arm (20) and rear arm (21).
(8) Remove upper arm (22) from two couplers (23).
(9) Remove two couplers (23) from front arm (20) and rear
arm (21).
c. Assembly.
NOTE
Perform steps (1) through (3) on M1081.
(1) Position two couplers (1) on rear arm (2) and front arm
(3).
(2) Position upper arm (4) in two couplers (1).
(3) Install two grooved pins (5) and four retaining clips (6) in
rear arm (2) and front arm (3).
14-28
