TM 9-2320-365-20-4
16-16. TOOL BOX REPLACEMENT/REPAIR
This task covers:
a. Removal
b. Disassembly
c. Assembly
d. Installation
e. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Spare tire lowered (TM 9-2320-365-10).
Tools removed from tool box (TM 9-2320-365-10).
Hydraulic manifold removed (para 19-4).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C)
Screwdriver Attachment, Socket Wrench (Item 47,
Appendix B)
Tools and Special Tools (Cont)
Drill, Electric, Portable (Item 7, Appendix C)
Drill Set, Twist (Item 6, Appendix C)
Materials/Parts
Latch, Bail Head (Item 59, Appendix G)
Seal, Nonmetallic (Item 252, Appendix G)
Nut, Self-Locking (8) (Item 139, Appendix G)
Nut, Self-Locking (2) (Item 140, Appendix G)
Personnel Required
(2)
a. Removal.
(1) Remove two screws (1), washers (2), and cover (3) from
backup hydraulic pump (4).
(2) Remove four self-locking nuts (5) and screws (6) from
spare tire retainer assembly (7). Discard self-locking
nuts.
(3) Remove four self-locking nuts (8) and screws (9) from
spare tire retainer assembly (7). Discard self-locking
nuts.
16-116
Change 1
