TM 9-2320-365-20-4
16-17. CAB STORAGE BOX REPLACEMENT/REPAIR
This task covers:
a. Removal
b. Disassembly
c. Assembly
d. Installation
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C)
Socket Set, Socket Wrench (Item 35, Appendix C)
Materials/Parts
Pin, Cotter (Item 208, Appendix G)
Grommet, Nonmetallic (Item 46, Appendix G)
Bumper, Rubber (12) (Item 4, Appendix G)
Channel, Rubber (Item 6, Appendix G)
Adhesive (Item 3, Appendix D)
a. Removal.
NOTE
Left and right storage boxes are removed the
same way. Left storage box shown.
(1) Open storage box cover (1).
(2) Remove six screws (2) and washers (3) from storage
box (4).
(3) Remove storage box (4) from cab floor (5).
b. Disassembly.
(1) Remove six nuts (1), washers (2), screws (3), and
storage box cover (4) from storage box (5).
(2) Remove two nuts (6), screws (7) and clamp (8) from
storage box cover (4).
16-122
