TM 9-2320-365-20-4
(6) Remove two spring pins (19) from handle (20) and latch
arm (12).
(7) Remove handle (20), latch arm (12), spacer (21), and
washer (22) from shaft (23).
(8) Remove sealing compound from around edge of plate
(24).
(9) Remove two screws (25) and plate (24) from RH door
(2).
(10) Remove shaft (23) from RH door (2).
(11) Remove bushing (26) from plate (24).
(12) Remove sealing compound from around edge of handle
assembly (27).
(13) Remove two screws (28) and handle assembly (27) from
RH door (2).
NOTE
Perform step (14) on van body serial
numbers 001 through 190.
(14) Remove two screws (29) and hasp (30) from RH door
(2).
NOTE
Perform step (15) on van bodies serial
number 191 and higher.
(15) Remove wing nut (31) and hasp (32) from RH door (2).
16-195