TM 9-2320-365-20-4
16-36. M1079 LH DOOR ASSEMBLY REPLACEMENT/REPAIR
This task covers:
a. Removal
b. Disassembly
c. Assembly
d. Installation
e. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
RH door opened (115 degrees) (TM 9-2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Sling, Endless (Item 32, Appendix C)
Drill, Portable, Electric (Item 7, Appendix C)
Drill Set, Twist (Item 6, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
Tool Kit, Blind Rivet (Item 43, Appendix C)
Materials/Parts
Adhesive (Item 11, Appendix D)
Sealing Compound (Item 67, Appendix D)
M1079 LH Door Gasket (Item E-7, Appendix E)
Materials/Parts (Cont)
Lockwasher (4) (Item 81, Appendix G)
Nut, Blind Rivet (4) (Item 112, Appendix G)
Lockwasher (9) (Item 87, Appendix G)
Rivet, Blind (2) (Item 228, Appendix G)
Rivet, Blind (2) (Item 227, Appendix G)
Nut, Blind Rivet (Item 115, Appendix G)
Nut, Self-Locking (6) (Item 121, Appendix G)
Lockwasher (13) (Item 82, Appendix G)
Lockwasher (3) (Item 94, Appendix G)
Nut, Self-Locking (2) (Item 117, Appendix G)
Nut, Self-Locking (9) (Item 118, Appendix G)
Personnel Required
(2)
a. Removal.
(1) Remove two screws (1) clamps (2) and conduit (3) from
LH door (4).
(2) Remove four screws (5), lockwashers (6), and door ajar
switch box (7) from plate (8). Discard lockwashers.
16-213
