TM 9-2320-365-20-4
Section II. MAINTENANCE PROCEDURES
16-2. POWER DISTRIBUTION PANEL (PDP) COVER AND LATCH REPLACEMENT/
ADJUSTMENT
This task covers:
a. Removal
b. Installation
c. Latch Adjustment
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
Drill, Portable, Electric (Item 7, Appendix C)
Tools and Special Tools (Cont)
Drill Set, Twist (Item 6, Appendix C)
Tool Kit, Blind Rivet (Item 43, Appendix C)
Material/Parts
Rivet, Blind (4) (Item 221, Appendix G)
a. Removal.
(1) Pull two spring catches (1) and lift two latch levers (2).
(2) Release two latch hooks (3) from two strike plates (4).
(3) Remove PDP cover (5) from dashboard (6).
WARNING
Wear appropriate eye protection when
removing rivets. Failure to comply may
result in injury to personnel.
(4) Remove four rivets (7) and two strike plates (4) from
PDP cover (5).
Change 1
16-3
