TM 9-2320-365-20-4
16-39. M1079 WINDOW SASH ASSEMBLY REPLACEMENT (CONT)
(12) Install four screws (15) in RH jamb sash (8).
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area.
If
adhesive, solvent, or sealing compound
gets
on
skin
or
clothing,
wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
(13) Apply adhesive completely around outside edge of glass
(10).
d. Installation.
NOTE
• Van body serial numbers 001 through 190 are
equipped with five window sash assemblies 30
in. (760 mm) tall. Van bodies serial number 191
and higher are equipped with four window sash
assemblies 14 in. (355 mm) tall.
• All window sash assemblies are installed the
same way. Left front window sash assembly on
van body serial number 191 shown.
• Perform step (1) on van bodies serial number
191 and higher.
(1) Install two stud base fasteners (1) on window sash (2)
with four rivets (3).
16-242
