TM 9-2320-365-20-4
NOTE
Install plastic cable ties as required.
(7) Route two wires 1507 (9), two wires 3086 (10), wires
2040 (11), 2006 (12), and 2010 (13) through conduit
connector (15).
NOTE
• Perform steps (8) through (10) if heater kit is
installed.
• Steps (8) through (10) require the aid of an
assistant.
(8) Connect connectors J244A (16) and P4A (17) to heater
power connector (18) and connector J4 (19).
CAUTION
Use care when installing heater cover and
deflector, electrical cables are attached.
Failure to comply may result in damage to
equipment.
(9) Install heater cover (20) on van body wall (5) with nine
washers (21), lockwashers (22), and screws (23).
16-277
