TM 9-2320-365-20-4
Section II. MAINTENANCE PROCEDURES
18-2. WINDSHIELD WASHER RESERVOIR AND PUMP REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Materials/Parts
Cleaning Compound, Windshield (Item 16,
Appendix D)
Grommet, Nonmetallic (Item 47, Appendix G)
a. Removal.
(1) Turn screw (1) to the left to unlock cab step tread (2).
(2) Remove two nuts (3), washers (4), and screw (5) from
cab step tread (2).
NOTE
Screw will remain attached to cab step.
(3) Remove cab step tread (2) from screw (6).
(4) Remove strap (7) from two brackets (8).
(5) Disconnect connector J25 (9) from connector P25 (10).
(6) Disconnect connector P125 (11) from windshield washer
pump (12).
18-2