TM 9-2320-365-20-4
18-4. WINDSHIELD WIPER MOTOR REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Batteries disconnected (para 7-48).
PDP cover removed (para 16-2).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Torque 0-200 lb-in. (Item 58, Appendix C)
Wrench, Torque 0-175 lb-ft (Item 57, Appendix C)
Wrench Set, Socket (Item 49, Appendix C)
Materials/Parts
Ties, Cable, Plastic (Item 76, Appendix D)
Nut, Self-Locking (Item 153, Appendix G)
a. Removal.
(1) Remove three screws (1) and washers (2) from PDP (3).
(2) Remove three screws (4) from PDP (3).
(3) Lift PDP (3) outward to gain access.
NOTE
Remove plastic cable ties as required.
(4) Disconnect connector PX22 (5) from wiper motor (6).
(5) Remove self-locking nut (7) and washer (8) from wiper
motor (6). Discard self-locking nut.
NOTE
Note orientation of wiper arm prior to
removal.
(6) Remove wiper arm (9) from wiper motor (6).
18-9
