TM 9-2320-365-20-4
18-5. WINDSHIELD WIPER LINKAGE REPLACEMENT (CONT)
(8) Position windshield wiper linkage (3) to full left position.
NOTE
Wiper arm should be in a straight line with
windshield wiper linkage prior to installing on
wiper motor.
(9) Position wiper arm (11) on wiper motor (12) with washer
(13) and self-locking nut (14).
(10) Tighten self-locking nut (14) to 20-26 lb-ft (27-35 N·m).
(11) Install PDP (15) on dashboard (4) with three screws (16).
(12) Install three washers (17) and screws (18) in PDP (15).
(13) Install three rubber washers (19), washers (20), nuts
(21), and collars (22) on wiper shafts (23).
18-16
