TM 9-2320-365-20-4
(26) Position front grille (29) on cab (30) with washer (31)
and screw (32).
(27) Position two washers (33) and screws (34) in front grille
(29).
(28) Tighten screw (32) to 48-60 lb-in. (5-7 N·m).
(29) Tighten two screws (34) to 24 lb-in. (3 N·m).
f. Follow-On Maintenance.
(1) Install kick panel (para 16-3).
(2) Install auxiliary panel (para 7-8), if equipped.
(3) Install CTIS ECU (para 12-6).
(4) Start engine and check for leaks (TM 9-2320-365-10).
(5) Add coolant as required (TM 9-2320-365-10).
(6) Operate personnel heater, checking for proper operation
and for coolant leaks (TM 9-2320-365-10).
(7) Shut down engine (TM 9-2320-365-10).
End of Task.
18-59
