TM 9-2320-365-20-4
19-9. SUSPENSION CYLINDER REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Cab raised (TM 9-2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
Gloves, Rubber (Item 13, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C)
Wrench, Torque, 0-600 lb-ft (Item 59, Appendix C)
Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C)
Socket Set, Socket Wrench (Item 34, Appendix C)
Wrench Set, Socket (Item 48, Appendix C)
Materials/Parts
Cap and Plug Set (Item 15, Appendix D)
Packing, Preformed (2) (Item 166, Appendix G)
Nut, Self-Locking (Item 116, Appendix G)
Pin, Cotter (Item 204, Appendix G)
Hydraulic Fluid A (Item 26, Appendix D)
Personnel Required
(2)
a. Removal.
NOTE
Left and right suspension cylinders are
removed the same way. Right side shown.
(1) Remove two quick release pins (1) from suspension
cylinder (2).
(2) Remove screw (3) and two lanyards (4) from suspension
cylinder (2).
19-39
