TM 9-2320-365-20-4
19-10. CAB HYDRAULIC CYLINDER REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Torque, 0-600 lb-ft (Item 59, Appendix C)
Wrench Set, Socket (Item 48, Appendix C)
Pan, Drain (Item 24, Appendix C)
Sling, Endless (Item 32, Appendix C)
Gloves, Rubber (Item 13, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
Cab Support Tool (Item E-4, Appendix E)
Materials/Parts
Nipple, Tube (Item 35, Appendix D)
Grease, Automotive and Artillery (GAA) (Item 23,
Appendix D)
Ties, Cable, Plastic (Item 76, Appendix D)
Dispenser, Pressure Sensitive Adhesive Tape
(Item 21, Appendix D)
Pin, Cotter (Item 207, Appendix G)
Nut, Self-Locking (Item 151, Appendix G)
Pin, Cotter (Item 206, Appendix G)
Washer, Spring (Item 274, Appendix G)
Packing, Preformed (2) (Item 161, Appendix G)
Washer, Spring (Item 282, Appendix G)
Packing, Preformed (Item 167, Appendix G)
Hydraulic Fluid A (Item 26, Appendix D)
Personnel Required
(2)
a. Removal.
(1) Position drain pan under cab hydraulic cylinder (1).
WARNING
Hydraulic fluid (MIL-H-5606) is TOXIC.
Wear protective goggles and gloves; use
only in well-ventilated area; avoid contact
with skin, eyes, and clothes. Skin and
clothing that come in contact with
hydraulic
oil
should
be
washed
immediately. Saturated clothing should
be removed immediately.
Failure to
comply may result in injury to personnel.
NOTE
• Remove plastic cable ties as required.
• Tag hoses and connection points prior to
disconnecting.
(2) Disconnect hoses (2 and 3) from 90-degree fittings (4
and 5).
19-45
