TM 9-2320-365-20-4
WARNING
Use care when installing window. Do not
force window, or window may shatter.
Failure to comply may result in injury to
personnel.
NOTE
Steps (6) and (7) require the aid of an
assistant.
(6) Position window (7) in door (2).
(7) Support window (7) and install two washers (8) and
screws (9) in window regulator (1).
(8) Lower window (7) until completely down.
(8.1) Position two lower window channels (9.1) over window
(7) from inside of door (2).
(8.2) Install two lower window channels (9.1) in door (2) with
four screws (9.2).
(8.3) Tighten four screws (9.2) to 10-14 lb-in. (1-2 N·m).
NOTE
Use a solution of soap and water to ease
installation of rubber sealing strips.
It may be necessary to roll window up and down
during installation of rubber sealing strips.
(8.4) Install rubber sealing strips (9.3) in two lower window
channels (9.1).
Change 1
16-42.1/(16-42.2 Blank)