TM 9-2320-365-20-4
NOTE
Ensure door lining fits inside of strip at
bottom of door.
(16) Position door lining (17) on door (5).
(17) Install 12 rivets (18) in door lining (17).
(18) Position latch (19) on door (5) with two screws (20).
(19) Tighten two screws (20) to 65-121 lb-in. (10-14 N·m).
(20) Install knob (21) on lock stud (22).
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area.
If
adhesive, solvent, or sealing compound
gets
on
skin
or
clothing,
wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
(21) Apply sealing compound to threads of screw (23).
(22) Position collar (24) and window crank (25) on window
regulator (26) with screw (23).
(23) Tighten screw (23) to 50-55 lb-in. (6 N·m).
(24) Install cover (27) on window crank (25).
Change 1
16-51
