TM 9-2320-365-20-5
20-70. LIGHT MATERIAL HANDLING CRANE (LMHC) ASSEMBLY/DISASSEMBLY
This task covers:
a. Assembly
b. Disassembly
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Sling, Cargo (Item 31, Appendix C)
Materials/Parts
Lockwasher (2) (Item 104, Appendix G)
Personnel Required
(2)
a. Assembly.
NOTE
LMHC may be installed in any of the four
cargo bed pockets.
Left front cargo bed
pocket shown.
(1) Remove quick release pin (1) and plug (2) from cargo
bed pocket (3).
WARNING
Light Material Handling Crane (LMHC)
mast weighs approximately 110 lbs (50
kgs). Attach a suitable lifting device prior
to installation. Failure to comply may
result in injury to personnel or damage to
equipment.
NOTE
• Step (2) requires the aid of an assistant.
• Position mast in cargo bed so handle does not
extend over front or rear edge of cargo bed.
(2) Install mast (4) in cargo bed pocket (3).
20-415
