TM 9-2320-365-20-5
20-73. LIGHT MATERIAL HANDLING CRANE (LMHC) WINCH REPLACEMENT/REPAIR
This task covers:
a. Removal
b. Base Plate Disassembly
c. Winch Disassembly
d. Cleaning/Inspection
e. Winch Assembly
f Base Plate Assembly
g. Installation
h. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
LMHC weight block and wire rope removed (para 20-
72).
LMHC power cable removed (TM 9-2320-365-10).
LMHC remote control cable removed (TM 9-2320-
365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
Gloves, Rubber (Item 13, Appendix C)
Materials/Parts
Dispenser, Pressure Sensitive Adhesive Tape
(Item 21, Appendix D)
Gasket (3) (Item 30, Appendix G)
Grease, Molybdenum Disulfide (Item 25, Appendix
D)
Rag, Wiping (Item 51, Appendix D)
Solvent, Dry Cleaning (Item 71, Appendix D)
Personnel Required
(2)
a. Removal.
(1) Loosen four screws (1) on winch (2).
NOTE
Step (2) and (3) require the aid of an
assistant.
(2) Slide winch (2) to rear of boom (3).
(3) Remove winch (2) from boom (3).
20-427
