TM 9-2320-365-20-5
20-77. LIGHT MATERIAL HANDLING CRANE (LMHC) CONTROL BOX REPAIR
This task covers:
a. Disassembly
b. Assembly
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
LMHC control box power cable removed (TM 9-2320-365-
10).
LMHC control box removed (TM 9-2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Tool Kit, Auto Fuel and Electrical Systems Repair (Item 43,
Appendix C)
Materials/Parts
Dispenser, Pressure Sensitive Adhesive
Tape (Item 21, Appendix D)
Lockwasher (2) (Item 85, Appendix G)
Lockwasher (2) (Item 96, Appendix G)
Lockwasher (4) (Item 95, Appendix G)
Gasket (Item 26, Appendix G)
Terminal, Lug (2) (Item 267, Appendix G)
a. Disassembly.
(1) Remove eight screws (1), cover (2), and retainer (3) from
NATO plug (4).
NOTE
Tag wires and connection points prior to
disconnecting.
(2) Remove two screws (5), lockwashers (6), and terminal
lugs (7 and 8) from NATO plug (4).
Discard
lockwashers.
(3) Remove terminal lugs (7 and 8) from wires (9 and 10).
Discard terminal lugs.
(4) Remove two grommets (11) from wires (9 and 10).
(5) Remove sleeve (12) from wires (9 and 10).
20-453
