TM 9-2320-365-20-5
WARNING
Use care when removing retaining rings.
Retaining rings are under tension and can act
as projectiles when released.
Failure to
comply may result in injury to personnel.
(4) Remove retaining ring (6) from rotator (5).
(5) Remove bearing (7) from rotator (5).
(6) Remove retaining ring (8) from rotator (5).
(7) Remove six screws (9), washers (10), and gear (11)
from rotator (5).
(8) Remove two screws (12), washers (13), lockwashers
(14), and plate (15) from housing (4).
Discard
lockwashers.
(9) Remove retaining ring (16) and handle (17) from shaft
(18).
(10) Remove two retaining rings (19), washers (20), and
washers (21) from shaft (18).
20-459
