TM 9-2320-365-20-5
(8) Install center top front cover (14) on pod (10) with eight
washers (13), lockwashers (12), and screws (11).
(9) Latch two latches (9) on pod (10).
(10) Remove dust cap (18) from connector J242 (19).
(11) Connect connector P242 (20) to connector J242 (19).
(12) Remove dust cap (21) from power input connector (22).
(13) Connect connector J242A (23) to power input connector
(22).
b. Removal.
(1) Disconnect connector J242A (1) from power input
connector (2).
(2) Install dust cap (3) on power input connector (2).
NOTE
Retain air conditioner power cable for future
use.
(3) Disconnect connector P242 (4) from connector J242 (5).
(4) Install dust cap (6) on connector J242 (5).
Change 1
20-473
