TM 9-2320-365-20-5
Section II. MAINTENANCE PROCEDURES
23-2. PRIMARY AND CENTRAL TIRE INFLATION SYSTEM (CTIS) AIR HOSES
REPLACEMENT
This task covers:
a. Hose Locations
b. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Air tanks drained (TM 9-2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
Materials/Parts
Dispenser, Pressure Sensitive Adhesive Tape
(Item 21, Appendix D)
Cap and Plug Set (Item 15, Appendix D)
Ties, Cable, Plastic (Item 76, Appendix D)
a. Hose Locations.
WARNING
Wear appropriate eye protection when working under vehicle due to the possibility of falling
debris. Failure to comply may result in injury to personnel.
CAUTION
Cap or plug hose connections to prevent contamination. Failure to comply may result in damage to
equipment.
NOTE
• This task shows locations of primary air supply and CTIS air hoses on the vehicle. It may not be
necessary to remove all hoses at one time.
• Tag hoses and connection points prior to removal.
• Note location of plastic cable ties prior to removal.
• Remove plastic cable ties as required.
• Inspect air hoses and fittings for cracks, kinks, nicks, stripped threads, and cuts. Replace damaged parts.
23-2
