APPENDIX C TOOLS IDENTIFICATION LIST Section I.   INTRODUCTION C-1.   INTRODUCTION This appendix lists common tools, supplements, and special tools/fixtures that are suggested for maintenance tasks performed at the Unit Maintenance level. C-2.   EXPLANATION OF COLUMNS a.  Column (1) - Item Number.   This number is assigned to the entry in the listing and is referenced in the narrative instructions to identify the item, e.g., "Bar, Pry (Item 1, Appendix C)." b.   Column (2) - Item Name.   This column contains the nomenclature for the item. c.  Column (3) - National Stock Number.  This is the national stock number assigned to the item which you can use to requisition it. d.   Column (4) - Part Number.   This provides the Government, manufacturer, or vendor part number for the item. e.   Column (5) - Reference.   This column contains the shop catalog (SC), technical manual, or other publication which provides an illustration and description of the item, or lists whether the item is fabricated. APPENDIX C Section II.   TOOLS IDENTIFICATION LIST (1) ITEM NUMBER (2) ITEM NAME (3) NATIONAL STOCK NUMBER (4) PART NUMBER (5) REFERENCE 1 ADAPTER, SOCKET WRENCH 5120-00-227-8088 A-A-2172 SC 4910-95-CL-A74 2 ADJUSTING TOOL, BRAKE SHOE 5120-00-154-3029 J34061 SC 4910-95-CL-A74 3 APRON, RUBBER 8145-00-082-6108 MIL-A-41829 SC 4910-95-CL-A74 4 CAPS, VISE JAW 5120-00-221-1506 GGG-C-137 SC 4910-95-CL-A74 5 DISPENSING PUMP, HAND DRIVEN 4930-00-263-9886 43D15069 SC 4910-95-CL-A74 6 DRILL SET, TWIST 5130-00-293-0983 58 SC 4910-95-CL-A74 7 DRILL, PORTABLE, ELECTRIC 5130-00-293-1849 W-D-661 SC 4910-95-CL-A74 8 DRILL, TWIST 5133-01-120-3519 SC 4910-95-CL-A74 C-1 TM 9-2320-365-20-5