TM 9-2320-365-20-5
(121) Loosen screw (186) on thermostat (180).
(122) Position wire 3086C (175) on thermostat (180).
(123) Tighten screw (186) on thermostat (180).
NOTE
Install plastic cable ties as required.
(124) Pull slack from wire 1499R (174), wire 3086C (175) and
wire 401 (176) into raceway (170) and secure in place.
(125) Install cover (179) on thermostat (180) with screw (178).
(126) Connect connector J165 (171) to connector P165 (172).
(127) Install cover (169) on raceway (170) with 12 washers
(168), lockwashers (167), and screws (166).
(128) Operate heater and check for proper operation (TM 9-
2320-365-10).
20-205
