11-7. FRONT BRAKE AIR CHAMBER REPLACEMENT (CONT)
Install plastic cable ties as required.
(7) Connect two air hoses (5) to fittings (1).
Brake pedal must be fully applied before and
during tightening of collet nut.
comply may result in damage to equipment.
Steps (8) through (10) require the aid of
(8) Apply brake pedal and continue holding until steps (9)
and (10) are accomplished.
(9) Hand tighten collet nut (3) against plunger housing (4).
Tighten collet nut (5) 3/16 turn (1/2 tooth).
Install left front wheel on vehicle (TM 9-2320-365-10).
Remove trestle from front of vehicle.
c. Follow-On Maintenance.
Start engine (TM 9-2320-365-10).
Check for air leaks around air chamber and fittings.
Road test truck and check for proper brake operation.
Shut down engine (TM 9-2320-365-10).
End of Task.