TM 9-2320-365-20-4
17-5. 11K SELF-RECOVERY WINCH (SRW) CABLE REPLACEMENT (CONT)
(10) Start engine (TM 9-2320-365-10).
(11) Engage PTO (TM 9-2320-365-10).
(12) Push and hold winch switch (TM 9-2320-365-10).
NOTE
After one complete layer of 11K SRW cable is
on drum, provide tension on 11K SRW cable by
physically pulling on 11K SRW cable so that
11K SRW cable spools on tightly.
Leave
enough 11K SRW cable unspooled to allow
installation of hook block.
Step (13) requires the aid of two assistants.
(13) Rewind 11K SRW cable (1) onto drum (9) (TM 9-2320-
365-10).
c. Follow-On Maintenance.
(1) Disengage PTO (TM 9-2320-365-10).
(2) Shut down engine (TM 9-2320-365-10).
(3) Lubricate 11K SRW cable (Appendix H).
End of Task.
17-22