TM 9-2320-365-20-4
17-6. WINCH CONTROL VALVE ASSEMBLY AND BRACKET REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Tools and Special Tools
Goggles, Industrial (Item 15, Appendix C)
Pan, Drain (Item 24, Appendix C)
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C)
Socket Set, Socket Wrench (Item 34, Appendix C)
Materials/Parts
Cap and Plug Set (Item 15, Appendix D)
Dispenser, Pressure Sensitive Adhesive Tape
(Item 21, Appendix D)
Packing, Preformed (5) (Item 159, Appendix G)
Ties, Cable, Plastic (Item 76, Appendix D)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
a. Removal
CAUTION
Cap or plug hoses and connection points to
prevent contamination of hydraulic system.
Failure to comply may result in damage to
equipment.
NOTE
Remove plastic cable ties as required.
Tag hoses and connection points prior to
disconnecting.
(1) Disconnect five hoses (1) from winch control valve (2).
17-23