TM 9-2320-365-20-5
20-78. LIGHT MATERIAL HANDLING CRANE (LMHC) MAST AND SWING ASSEMBLY
REPAIR (CONT)
(5) Install two bearings (11) in housing (7).
(6) Install woodruff key (12) on shaft (13).
(7) Install worm gear (14), two washers (15), washer (16),
and shaft (13) in housing (7).
WARNING
Use care when installing retaining rings.
Retaining rings are under tension and can act
as projectiles when released.
Failure to
comply may result in injury to personnel.
(8) Install two washers (17), washers (18), and retaining
rings (19) on shaft (13).
(9) Install handle (20) on shaft (13) with retaining ring (21).
20-462