TM 9-2320-365-20-1
2-939
CONTINUITY TEST
(1) Set multimeter to ohms.
(2) Connect positive (+) probe of multimeter to
connector P110-J.
(3) Connect negative (-) probe of multimeter to
connector P113-A and note reading on
multimeter.
(4) If continuity is not present, replace CTIS
cable assembly (para 7-53).
(5) If continuity is present, replace manifold valve
assembly (para 12-7).
(6) Connect connector P113 to manifold valve
assembly.
(7) Install kick panel (para 16-3).
(8) Connect connector P110 to CTIS ECU.
