TM 9-2320-365-20-1
2-961
CONTINUITY TEST
(1) Set multimeter to ohms.
(2) Connect positive (+) probe of multimeter to
winch out solenoid L5 terminal 2.
(3) Connect negative (-) probe of multimeter to
ground and note reading on multimeter.
(4) If continuity is not present, repair wire 3070
(para 2-40) or replace winch control valve
cable cable assembly (para 7-85).
(5) If continuity is present, replace winch control
valve assembly (para 17-6).
(6) Connect winch out solenoid L5 connector on
solenoid L5 and tighten screw.
