TM 9-2320-365-20-1
2-991
CONTINUITY TEST
(1) Disconnect connector P210 from connector
J210.
(2) Set multimeter to ohms.
(3) Connect positive (+) probe of multimeter to
connector P913-14.
(4) Connect negative (-) probe of multimeter to
connector J210-4 and note reading on
multimeter.
(5) If continuity is not present, repair wire 2019
(para 2-40) or replace auxiliary panel cable
assembly (all models except M1079 w/o winch)
(para 7-49).
(6) If continuity is present, replace WTEC II relay
SF02 (para 8-6).
(7) Connect connector P913 to connector J913.
(8) Connect connector J210 to connector P210.
(9) Install personnel heater (para 18-9).
