e89. ELECTRICAL SYSTEM DOES NOT MAINTAIN A CHARGE (CONT)
YES
NO
TM 9-2320-365-20-1
2-1016.10 Change 1
CAUTION
Read CAUTION
on following page.
9.
Is continuity present from
relay K11 terminal 87A on
PDP to connector J31
pin 1?
KNOWN INFO
Engine oil pressure indicator
light illuminates.
OIL PRESS gage operates.
Engine starts.
Alternator belts OK.
Battery(ies) OK.
Engine oil pressure switch OK.
Relay K11 OK.
POSSIBLE PROBLEMS
Faulty dashboard cable
assembly.
Faulty engine control cable
assembly.
TEST OPTIONS
Continuity Test or
STE/ICE-R Test #91
REASON FOR QUESTION
Repair wire 568A from connector
J31 pin 1 to relay K11 terminal 87A
on PDP (para 2-40) or replace WTEC II
dashboard cable assembly (para 7-10)
or WTEC III dashboard cable assembly
(para 7-11).
Repair wire 568A from connector
P31 socket 1 to terminal lug TL35 (para
2-40) or replace engine control cable
assembly (para 7-72).
If continuity is not present,
wire 568A from connector J31
pin 1 to relay K11 terminal
87A on PDP is faulty. If
continuity is present , wire
568A from connector P31
socket 1 to terminal lug TL35
is faulty.
