TM 9-2320-365-20-1
2-1072
YES
NO
2.
3.
Is 24 vdc present on
terminal lug TL159?
If 24 vdc is not present,
wire 1463 is faulty.
YES
NO
Is continuity present
between terminal lug TL158
and relay K19 terminal 86?
If continuity is not present,
wire 1637 is faulty.
KNOWN INFO
TEST OPTIONS
Voltage Test or
STE/ICE-R #89
REASON FOR QUESTION
KNOWN INFO
TEST OPTIONS
Continuity Test or
STE/ICE-R #91
REASON FOR QUESTION
WARNING
Read WARNING
on following page.
Engine will start after start
inhibit pushbutton switch
is pressed.
Start inhibit pushbutton
switch OK.
POSSIBLE PROBLEMS
Faulty dashboard cable
assembly.
Faulty relay K19.
Engine will start after start
inhibit pushbutton switch
is pressed.
Start inhibit pushbutton
switch OK.
Wire 1463 OK.
POSSIBLE PROBLEMS
Faulty dashboard cable
assembly.
Faulty relay K19.
Repair wire 1463 (para 2-40)
or replace WTEC II dashboard cable
assembly (para 7-10) or WTEC III
dashboard cable assembly (para 7-11).
Repair wire 1637 (para 2-40)
or replace WTEC II dashboard cable
assembly (para 7-10) or WTEC III
dashboard cable assembly (para 7-11).
e96. START INHIBIT PUSHBUTTON DOES NOT OPERATE (CONT)
