e2. ENGINE DOES NOT CRANK (CONT)
KNOWN INFO
CAUTION
Read CAUTION
on following page.
TEST OPTIONS
REASON FOR QUESTION
49.
Continuity Test or
STE/ICE-R Test #91
NO
YES
TM 9-2320-365-20-1
2-250 Change 1
If continuity is not present,
wire (refer to Table 2-8.3.
Connector PX33 Continuity
Test) is faulty.
Is continuity present from
connector PX33 socket
(refer to Table 2-8.3.
Connector PX33 Continuity
Test) to connector P116
socket (refer to Table 2-8.3.
Connector PX33 Continuity
Test)?
Repair wire (refer to Table 2-8.3. Connector
PX33 Continuity Test (para 2-40) or replace
WTEC III dashboard cable assembly (para 7-11).
Transmission pushbutton
shift selector in neutral (N).
Batteries OK.
Service drive lights OK.
Circuit breakers OK.
Starting motor OK.
Battery to starter cable
assembly OK.
Oil pressure switch OK.
POSSIBLE PROBLEMS
Faulty dashboard cable
assembly.
Faulty WTEC III transmission
ECU.
Faulty WTEC III transmission
pushbutton shift selector
(TPSS).
