CONTINUITY TEST - TM-9-2320-365-20-1

SIDE AND/OR REAR MARKER LIGHT(S) DO NOT ILLUMINATE (CONT) - TM-9-2320-365-20-1_866

POSSIBLE PROBLEMS - TM-9-2320-365-20-1_868

/.5tonm1078v1-5/TM-9-2320-365-20-1 Palletized Load System Model M1074/M1075 NSN 2320-01-304-2277 2320-01-304-2278 Manual
Page Navigation
819

CONTINUITY TEST (1) Remove two screws and lens cover from LH rear marker light base. (2) Remove LH rear marker light lamp from socket. (3) Set multimeter to ohms. (4) Check continuity through LH rear marker light lamp and note reading on multimeter. (5) If continuity is not present, replace LH rear marker light lamp (para 7-31) and go to step 5 of this fault if required. (6) Install LH rear marker light lamp in socket. (7) Install lens cover on LH rear marker light base with two screws. Change 1 2-584.3 TM 9-2320-365-20-1

Privacy Statement
Press Release
Contact