TM 9-2320-365-20-2
2-1277
CONTINUITY TEST
(1) Disconnect connector P244 from HEATER
connector J244.
(2) Remove six screws and cover from 110/208 VAC
POWER DISTRIBUTION PANEL.
(3) Set multimeter to ohms.
(4) Connect positive (+) probe of multimeter to
output terminal on circuit breaker CB8.
(5) Connect negative (-) probe of multimeter to
HEATER connector J244 socket A and note
reading on multimeter.
(6) If continuity is not present, repair or replace wire
400 (para 2-40).
