TM 9-2320-365-20-2
CONTINUITY TEST
(1) Set multimeter to ohms.
(2) Connect positive (+) probe of multimeter to
wire 707A terminal lug on LIGHTS/BLACKOUT
OVERRIDE switch S33.
(3) Connect negative (-) probe of multimeter to
K36 relay base terminal 7 and note reading on
multimeter.
(4) If continuity is not present, repair or replace
wire 707A (para 2-40).
(5) If continuity is present, repair or replace wire
1511 (para 2-40).
(6) Position LIGHTS/BLACKOUT OVERRIDE switch
S33 to BLACKOUT (TM 9-2320-365-10).
(7) Close cover on relay box assembly.
(8) Tighten screw in cover.
2-1357/(2-1358 Blank)